TEAC NT-503DAB Owner s Mamual English Francais Espanol - Page 13
Using the remote control, Precautions for use, Installing batteries, When to replace batteries
View all TEAC NT-503DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Using the remote control G USB port (front) Precautions for use Connect USB flash drives here. VVMisuse of batteries could cause them to rupture or oo To play music files on a USB flash drive, set the input source leak, which might result in fire, injury or the stain- to NET and use the app for playback. ing of nearby materials. Please carefully read and EN oo Do not connect a computer to the USB port on the front of observe the precautions on page 5. the unit. To input audio from a computer, connect it to the USB port on the back of the unit. oo For details, see the Network Manual. oo When using the remote control, point it toward the remote control signal receiver on the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the H PHONES jack Connect headphones with a standard 6.3 mm (1/4") stereo plug here (page 15). oo If headphones are connected to this unit, audio will not be output from the analog audio outputs on the rear panel. remote control. oo The remote control might not work if the remote control signal receiver on the unit is exposed to direct sunlight or bright light. If this occurs, try moving the unit. oo Beware that use of this remote control could cause the unintentional operation of other devices that can be controlled by infrared rays. I Display This display shows information about the audio playing back and menu screens. Installing batteries J VOLUME knob Use to adjust the headphones output volume. Turn right to increase and left to decrease the volume. oo To enable adjustment of this unit's analog audio output volume, set LINE OUT LEVEL to VARIABLE ("Line output level" on page 21). This will enable adjustment of the analog output level using this unit's VOLUME knob. oo Volume settings are retained separately for analog audio output and headphone output. Remove the cover from the back of the remote control and insert two AAA batteries with their ¥/^ ends oriented in the case as shown. Replace the cover. When to replace batteries If the distance required between the remote and the main unit decreases or if the unit stops responding to the remote buttons, replace both batteries with new ones. Dispose of the used batteries according to the instructions on them or requirements set by your local municipality. 13