TEAC NT-503DAB Owner s Mamual English Francais Espanol - Page 28

Using the DAB menu (cont'd) Setting presets STATION ORDER You can set the order in which stations are listed. 1 When the DAB menu is open, select STATION ORDER, and press the INPUT SELECTOR knob. 2 Turn the INPUT SELECTOR knob until the desired setting is shown, and then press the INPUT SELECTOR knob. You can select one of the three settings. ALPHANUMERIC This is the default order. Stations are listed by name with numbers first and then alphabetically by station name. ENSEMBLE Channels are listed by ensemble name. VALID This option will list active stations at the top of the station list in alphanumeric order, followed by stations that are in the list but are not available in the current area. You can store presets for up to 10 DAB stations. 1 In DAB mode, tune in to the station you want to add as a preset. 2 Press the INPUT SELECTOR knob for three or more seconds or press the remote control PROGRAM button. Display example Station 1 >SAVE PRESET X 3 Within 10 seconds, turn the INPUT SELECTOR knob until the desired preset number is shown, and press the INPUT SELECTOR knob to store the station preset. oo You can also use the up and down (k, j) buttons on the remote control to show the desired preset number. oo The available preset numbers are 0 to 9. oo Preset numbers currently used are marked with an asterisk (*). oo If you do not press the INPUT SELECTOR knob within 10 sec- onds of selecting the preset, the selection will be canceled. oo If you store a new station to a preset, the station previously stored as that preset will be overwritten. To store more station presets, repeat steps 1 to 3. 28