TEAC NT-503DAB Owner s Mamual English Francais Espanol - Page 25

Listening to DAB radio Using the Station List When the unit is switched to DAB mode for the first time, the automatic tuning process will start and create a station list (Full scan). 1 Turn the INPUT SELECTOR knob to show DAB and press the INPUT SELECTOR knob to select it, or press the remote control TUNER button and press the ENTER button. oo Since the unit retains the same source mode when in standby, this step can be skipped if the unit was in DAB mode when put into standby. 5 Press the INPUT SELECTOR knob to select the sta- tion you want. The station will be tuned in and its information shown. oo Stations are listed in the order set using STATION ORDER. See EN "STATION ORDER" on page 28. oo If a station is no longer broadcasting or the unit is moved out of the area of a broadcast service, the unit will no longer be able to tune in that station. If you select such a station to tune in by pressing the INPUT SELECTOR knob, "No DAB Signal" will be displayed. oo You can move a station that is no longer available to the end of the channel list (page 28). 2 Press the MENU button to open the DAB menu, and turn the INPUT SELECTOR knob until STATION LIST is shown. Display example *STATION LIST Station 1 oo You can also use the up and down (k, j) buttons on the remote control to show STATION LIST. 3 Press the INPUT SELECTOR knob to show stations in the station list on the bottom line of the display. Display example *STATION LIST >Station 1 oo You can also use the remote control ENTER button. 4 Turn the INPUT SELECTOR knob until the desired station is shown on the bottom line of the display. Display example *STATION LIST >Station 2 oo You can also use the up and down (k, j) buttons on the remote control. 25