TP-Link AV1000 TL-PA7020P KIT V1 User Guide - Page 12

Hardware Connection – Computer - powerline adapter

Get TP-Link AV1000 PDF manuals and user guides View all TP-Link AV1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

TL-PA7020P AV1000 2-port Gigabit Passthrough Powerline Adapter 2.3 Hardware Connection - Computer For those computers you wish to be networked by powerline adapters, each of the computers must be properly connected with a powerline adapter through an Ethernet (RJ45) cable. Following are the steps to properly connect the powerline adapter to your computer: 1．Connect one end of the provided Ethernet (RJ45) cable to the Ethernet port of the powerline adapter. 2．Connect the other end of the Ethernet (RJ45) cable to your computer's LAN port. 3．Plug the powerline adapter into a wall socket next to the computer. 4．Turn on your computer. 5．Check and confirm that the Power LED ON. and Ethernet LED The hardware connection mechanism is shown below: on the powerline adapter are 1000Mbps  Note: Do not connect the powerline adapter to any extension lead, power strip, extension cord or surge protector, as this may degrade the network performance. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
TL-PA7020P
AV1000 2-port Gigabit Passthrough Powerline Adapter
6
2.3 Hardware Connection – Computer
For those computers you wish to be networked by powerline adapters, each of the computers must be
properly connected with a powerline adapter through an Ethernet (RJ45) cable.
Following are the steps to properly connect the powerline adapter to your computer:
1
．
Connect one end of the provided Ethernet (RJ45) cable to the Ethernet port of the powerline adapter.
2
．
Connect the other end of the Ethernet (RJ45) cable to your computer’s LAN port.
3
．
Plug the powerline adapter into a wall socket next to the computer.
4
．
Turn on your computer.
5
．
Check and confirm that the Power LED
and Ethernet
LED
on the powerline adapter are
ON
.
The hardware connection mechanism is shown below:
1000Mbps
Note
:
Do not connect the powerline adapter to any extension lead, power strip, extension cord or surge
protector, as this may degrade the network performance.