TP-Link EAP245 EAP245EU V1 User Guide - Page 23
WPA-PSK
View all TP-Link EAP245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
11b/g/n mode (in the 2.4GHz frequency band) or 11a/n (in the 5GHz frequency band), the device may work at a low transmission rate. WPA-PSK Based on pre-shared key, security mode WPA-PSK is characterized by high security and simple configuration, which suits for common households and small business. WPA-PSK has two versions: WPA-PSK and WPA2-PSK. Figure 5-7 Security Mode_WPA-PSK Version: Auto: Select WPA or WPA2 automatically based on the wireless station's capability and request. WPA: Pre-shared key of WPA. WPA2: Pre-shared key of WPA2. Encryption: Select the encryption type, including Auto, TKIP, and AES. The default setting is Auto, which can select TKIP (Temporal Key Integrity Protocol) or AES (Advanced Encryption Standard) automatically based on the wireless station's capability and request. AES is more secure than TKIP and TKIP is not supported in 802.11n mode. It is recommended to select AES as the encryption type. Wireless Password: Configure the WPA-PSK/WPA2-PSK password with ASCII or Hexadecimal characters. For ASCII, the length should be between 8 and 63 characters with combination of numbers, letters (case-sensitive) and common punctuations. For Hexadecimal, the length should be 64 characters (caseinsensitive, 0-9, a-f, A-F). Group Key Specify the group key update period in seconds. The value can be either Update Period: 0 or 30-8640000 seconds. 14