TP-Link EAP245 EAP245EU V1 User Guide - Page 61
Enable Nvram
View all TP-Link EAP245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Figure 7-5 Enable Server System Log Server IP: Enter the IP address of the remote server. System Log Server Port: Enter the port of the remote server. Enable Nvram By default, Nvram is disabled. Check the box to enable Nvram, system logs will be saved after power supply is cut. Nvram (Non-volatile Random Access Memory) is a RAM that can still save data even if a device is power off. All TP-Link EAPs are equipped with Nvram. With this option enabled, the Nvram feature can help reserve the system logs when an EAP device is power off. 7.2 Web Server You can log in web management interface, thereby manage and maintain the device. Following is the page of Web Server. Figure 7-6 Web Server Page HTTPS: HTTPS (Hypertext Transfer Protocol Secure) is enabled by default. Secure Server Designate a secure server port for web server in HTTPS mode. By Port: default the port is 443. 52