TP-Link T2600G-28TS TL-SG3424 T2600G-28TS V1 CLI Reference Guide - Page 238
spanning-tree bpduguard, spanning-tree guard loop
View all TP-Link T2600G-28TS TL-SG3424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
T2600G-28TS(config-if)# spanning-tree bpdufilter 30.18 spanning-tree bpduguard Description The spanning-tree bpduguard command is used to enable the BPDU protect function for a port. With the BPDU protect function enabled, the port will set itself automatically as ERROR-PORT when it receives BPDU packets, and the port will disable the forwarding function for a while. To disable the BPDU protect function, please use no spanning-tree bpduguard command. Syntax spanning-tree bpduguard no spanning-tree bpduguard Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Example Enable the BPDU protect function for port 1/0/2: T2600G-28TS(config)# interface gigabitEthernet 1/0/2 T2600G-28TS(config-if)# spanning-tree bpduguard 30.19 spanning-tree guard loop Description The spanning-tree guard loop command is used to enable the Loop Protect function for a port. Loop Protect is to prevent the loops in the network brought by recalculating STP because of link failures and network congestions. To disable the Loop Protect function, please use no spanning-tree guard loop command. Syntax spanning-tree guard loop no spanning-tree guard loop Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) 222