TP-Link T2600G-28TS TL-SG3424 T2600G-28TS V1 CLI Reference Guide - Page 284
snmp-server traps snmp
View all TP-Link T2600G-28TS TL-SG3424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
Example Specify the local engineID as 1234567890, and the remote engineID as abcdef123456: T2600G-28TS(config)# snmp-server engineID local 1234567890 remote abcdef123456 33.8 snmp-server traps snmp Description The snmp-server traps snmp command is used to enable SNMP standard traps which include four types: linkup, linkdown, warmstart and coldstart. To disable the sending of SNMP standard traps, please use no snmp-server traps snmp command. Syntax snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart | auth-failure ] no snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart | auth-failure ] Parameter linkup -- Enable linkup trap. It is sent when port status changes from linkdown to linkup. By default, it is enabled. linkdown --Enable linkdown trap. It is sent when port status changes from linkup to linkdown. By default, it is enabled. warmstart -- Enable warmstart trap. It is sent upon SNMP function reboot. By default, it is enabled. coldstart -- Enable coldstart trap. It is sent upon switch reboot. By default, it is enabled. auth-failure -- Enable the auth-failure trap. It is sent when a received SNMP request fails the authentication. By default, it is enabled. Command Mode Global Configuration Mode Example Enable SNMP standard linkup trap for the switch: T2600G-28TS(config)# snmp-server traps snmp linkup 268