TP-Link T2600G-28TS TL-SG3424 T2600G-28TS V1 CLI Reference Guide - Page 265
ipv6 mld snooping vlan-config
View all TP-Link T2600G-28TS TL-SG3424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
restore the default number, please use no ipv6 mld snooping last-listener query-count command. Syntax ipv6 mld snooping last-listener query-count num no ipv6 mld snooping last-listener query-count Parameter num -- Specify the numbers of Specific Query Message to be sent, ranging from 1 to 5. Command Mode Global Configuration Mode Example Specify the number of Specific Query Message to 3: T2600G-28TS(config)# ipv6 mld snooping last-listener query-count 3 32.10 ipv6 mld snooping vlan-config Description The ipv6 mld snooping vlan-config command is used to enable VLAN MLD Snooping function or to modify MLD Snooping parameters, and to create static multicast IP entry. To disable the VLAN MLD Snooping function, please use no ipv6 mld snooping vlan-config command. Syntax ipv6 mld snooping vlan-config vlan-id-list [ rtime router-time | mtime member-time | rport interface { gigabitEthernet port-list | port-channel port-channel-id } ] ipv6 mld snooping vlan-config vlan-id-list static ip interface { gigabitEthernet port-list | port-channel port-channel-id } no ipv6 mld snooping vlan-config vlan-id-list [ rtime router-time | mtime member-time | rport interface { gigabitEthernet port-list | port-channel port-channel-id } ] no ipv6 mld snooping vlan-config vlan-id-list static ip interface { gigabitEthernet port-list | port-channel port-channel-id } Parameter vlan-id-list -- The ID list of the VLAN desired to modify configuration, ranging from 1 to 4094, in the format of 1-3, 5. router-time -- Router Port Time. Within this time, if the switch does not receive IGMP query message from the router port, it will consider this port is not 249