TP-Link TC-7610 TC-7610(US) V1 User Guide - Page 15
Software Configuration, 4.1 TCP/IP Configuration - router
View all TP-Link TC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
TC-7610 DOCSIS 3.0 Cable Modem User Guide Chapter 4. Software Configuration This User Guide recommends using the "Quick Installation Guide" for first-time installation. If you want to know more about this device, maybe you will get help from this chapter to configure the advanced settings through the Web-based Utility. 4.1 TCP/IP Configuration The default IP address of the TC-7610 DOCSIS 3.0 Cable Modem is 192.168.100.1. And the default Subnet Mask is 255.255.255.0. we use all the default values for description. Connect the local PC to the LAN/WAN port of the modem router. And then you can configure your PC in the following way. 1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If you need instructions as to how to do this, please refer to Appendix C: Configure the PC. 2) Then the built-in DHCP server will assign IP address for the PC. Now, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd or command in the field and press Enter. Type ping 192.168.100.1 on the next screen, and then press Enter. If the result displayed is similar to the screen below, the connection between your PC and the router has been established. If the result displayed is similar to the screen shown below, it means that your PC has not connected to the router. 11