TP-Link TD-W8961NB TD-W8961NB User Guide - Page 65
TD-W8961NB, NTP Server automatically, PC's Clock
View all TP-Link TD-W8961NB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
TD-W8961NB 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-48). The system time is the time used by the device for scheduling services. There are three methods to configure the time. You can manually set the time or connect to a NTP (Network Time Protocol) server. If a NTP server is set, you will only need to set the time zone. If you manually set the time, you may also set Daylight Saving dates and the system time will automatically adjust on those dates. 1) NTP Server automatically Select NTP Server automatically as the Synchronize time, you only need to set the time zone. Figure 4-48 ) Note: The ADSL Router built-in some NTP Servers, when the Router connects to the Internet, the Router will get the system time automatically from the NTP Server. You can also configure the NTP Server address manually, and then the Router will get the time from the specific Server firstly. 2) PC's Clock Select PC's Clock as the Synchronize time, you don't need to set any items. Figure 4-49 59