TP-Link TL-ER604W TL-ER604W V1 User Guide 1910010844 - Page 21

-16-

The following items are displayed on this screen:



PPPoE Settings

Connection Type:

Select PPPoE if your ISP provides xDSL Virtual Dial-up connection.

Click <Connect> to dial-up to the Internet and obtain the IP address.

Click <Disconnect> to disconnect the Internet connection and

release the current IP address.

Account Name:

Enter the Account Name provided by your ISP. If you are not clear,

please consult your ISP.

Password:

Enter the Password provided by your ISP.

Active Mode:

You can select the proper Active mode according to your need.



Manual: Select this option to manually activate or terminate the

Internet connection by the <Connect> or <Disconnect> button.

It is optimum for the dial-up connection charged on time.



Always-on: Select this option to keep the connection always

on. The connection can be re-established automatically when it

is down.



Time-based: Select this option to keep the connection on

during the Active time you set.

PPPoE Advanced

Settings:

Check here to enable PPPoE advanced settings.

Keep Alive:

Once PPPoE is connected, the Router will send keep-alive packets

every "Keep Alive Interval" sec and "Keep Alive Retry Times" to

make sure the connection is still alive. If the Router does not get the

response from ISP after sending keep-alive packets, then the

Router will terminate the connection.

MTU:

MTU (Maximum Transmission Unit) is the maximum data unit

transmitted by the physical network. It can be set in the range of

576-1492. The default MTU is 1480. It is recommended to keep the

default value if no other MTU value is provided by your ISP.

Section	Page
Package Contents	6
Chapter 1 About this Guide	7
1.1 Intended Readers	7
1.2 Conventions	7
1.3 Overview of this Guide	7
Chapter 2 Introduction	8
2.1 Overview of the Router	8
2.2 Features	9
2.3 Appearance	11
2.3.1 Front Panel	11
2.3.2 Rear Panel	12
Chapter 3 Configuration	13
3.1 Network	13
3.1.1 Status	13
3.1.2 System Mode	13
3.1.3 WAN	15
3.1.4 LAN	32
3.1.5 MAC Address	35
3.1.6 Switch	36
3.2 Wireless	42
3.2.1 Wireless Setting	42
3.2.2 MAC Filtering	55
3.2.3 Host Status	56
3.3 User Group	57
3.3.1 Group	57
3.3.2 User	58
3.3.3 View	59
3.4 Advanced	60
3.4.1 NAT	60
3.4.2 Traffic Control	68
3.4.3 Session Limit	71
3.4.4 Load Balance	73
3.4.5 Routing	77
3.5 Firewall	82
3.5.1 Anti ARP Spoofing	82
3.5.2 Attack Defense	85
3.5.3 MAC Filtering	87
3.5.4 Access Control	87
3.5.5 App Control	93
3.6 VPN	94
3.6.1 IKE	95
3.6.2 IPsec	99
3.6.3 L2TP/PPTP	105
3.7 Services	109
3.7.1 PPPoE Server	109
3.7.2 E-Bulletin	114
3.7.3 Dynamic DNS	116
3.7.4 UPnP	121
3.8 Maintenance	122
3.8.1 Admin Setup	122
3.8.2 Management	125
3.8.3 License	127
3.8.4 Statistics	128
3.8.5 Diagnostics	130
3.8.6 Time	132
3.8.7 Logs	133
Chapter 4 Application	135
4.1 Network Requirements	135
4.2 Network Topology	136
4.3 Configurations	136
4.3.1 Internet Setting	136
4.3.2 VPN Setting	138
4.3.3 Network Management	144
4.3.4 Network Security	148
Appendix A Hardware Specifications	153
Appendix B FAQ	154

TP-Link TL-ER604W TL-ER604W V1 User Guide 1910010844 - Page 21

Connection Type, Account Name, Password, Active Mode, PPPoE Advanced, Settings, Keep Alive - default password

Page 21 highlights