TP-Link TL-ER604W TL-ER604W V1 User Guide 1910010844 - Page 45
Auth Type, Encryption, Password, Group, Update, Period, Automatic, WPA-PSK, WPA/WPA2
View all TP-Link TL-ER604W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Auth Type: Choose the Auth type of the WPA-PSK/WPA2-PSK security on the drop-down list. The default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's capability and request. Encryption: Select the Encryption typeđ including Automatic, TKIP, AES. The default setting is Automatic, which can selectTKIP (Temporal Key Integrity Protocol) or AES čAdvanced Encryption StandardĎ automatically based on the wireless station's capability and request. TKIP - TKIP is a security protocol used in the IEEE 802.11 wireless networking standard. AES - AES is a specification for the encryption of electronic data established by the U.S. National Institute of Standards and Technology. Password: Enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. The default password is the same with the default PIN code, which is labeled on the bottom of the Router Group Key Update Specify the group key update interval in seconds. The value should be 30 Period: or above. Enter 0 to disable the update. 2) WPA/WPA2 It's based on Radius Server. Auth Type: You can choose the Auth type of the WPA/WPA2 security on the drop-down list. The default setting is Automatic, which can selectWPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. -40-