TP-Link TL-PA201 User Guide - Page 8
Physical Interface - 200mbps
 |
UPC - 845973031091
View all TP-Link TL-PA201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
TL-PA201 200Mbps Powerline Ethernet Adapter ) Note: 1. When PLC is flashing, different colours represent different data transmitting performance. Green LED：Power Line speed>80 Mbps Amber LED：Power Line speed30Mbps Red LED：Power Line speed
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
 |
 |
TL-PA201
200Mbps Powerline Ethernet Adapter
3
)
Note:
1.
When PLC is flashing, different colours represent different data transmitting performance.
Green LED
：
Power Line speed>80 Mbps
Amber LED
：
Power Line speed<80 Mbps and >30Mbps
Red LED
：
Power Line speed<30 Mbps
2.
5 minutes later since the device connected to the Homeplug is powered off, the Homeplug will
switch to Power-saving Mode automatically.
2.3 Physical Interface
There are four physical interfaces on this Powerline Ethernet Adapter.
Interface
Description
Ethernet
One 10/100Mbps Ethernet port connected to PC LAN card or broadband
device
Power Plug
Power Plug connected to any 100V ~ 240V AC power socket
Reset
Use a pin to press and hold this Reset button for 3 to 10 seconds then the
device will restore to factory defaults
Pair
Press and hold the Pair button for about 3 to 8 seconds, then release it. The
Power LED will begin flashing. Perform the same step to the Rest of the
Homeplug devices in 2 minutes
)
Note:
1.
If you press the Pair button for more than 10 seconds, The PLC will leave the network it is
associated with and its network name assumes a random value. The Power LED turns off when it
disconnects from the Powerline network.
2.
For detail information about the Reset button and Pair button, please refer to
Charpter 5 Advanced
Feature:How to Use the Push buttons