TP-Link TL-R470T User Guide - Page 14
Step 4, Obtain an IP address, automatically, Obtain DNS server address automatically, Start, Enter - configuration
View all TP-Link TL-R470T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Step 4: Configure the IP address as shown in Figure 3-4. After that, click OK. Figure 3-4 Note: You can configure the PC to get an IP address automatically, select "Obtain an IP address automatically" and "Obtain DNS server address automatically" in the screen above. For Windows 98 OS or earlier, the PC and router may need to be restarted. Now, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd in the field, and then type ping 192.168.0.1 on the next screen, and then press Enter. If the result displayed is similar to the screen below, the connection between your PC and the Router has been established. Figure 3-5 If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Router. -10-