TP-Link TL-R470T User Guide - Page 72
Application Example, If the LAN port of TL-R470T
View all TP-Link TL-R470T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
The first entry in Figure 4-35 indicates: If there are packets being sent to a device with IP address of 211.162.1.0 and subnet mask of 255.255.255.0, the Router will forward the packets from WAN1 port to the next hop of 211.200.1.1. Application Example There is a network topology as the following figure shown: If the LAN port of TL-R470T+(with Non-NAT or Classic system mode)is connected to LAN1 with subnet of 192.168.0.0/24, while the LAN port of another Router R1 is connected to LAN2 with network of 192.168.2.0/24. Meanwhile, the WAN ports of the two routers are interconnected and within the same network. Now a host under TL-R470T+ and within network of LAN1 desires to communicate with the host within network of LAN2. You can set a Static Route entry: Enter the WAN IP address of R1 (116.31.88.16) in the Next Hop field on the Static Route page of TL-R470T+ as the following figure shown, then click the button to save the entry. -68-