TP-Link TL-R860 User Guide - Page 33

Security

Get TP-Link TL-R860 PDF manuals and user guides
UPC - 845973040109
View all TP-Link TL-R860 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

TL-R860 Cable/DSL Router User Guide Click Refresh to update the Current UPnP Settings List. 4.7 Security Figure 4-23 the Security menu There are six submenus under the Security menu (shown in Figure 4-23): Firewall, IP Address Filtering, Domain Filtering, MAC Filtering, Remote Management and Advanced Security. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.7.1 Firewall Using the Firewall page (shown in Figure 4-24), you can turn the general firewall switch on or off. The default setting for the switch is off. If the general firewall switch is off, even if IP Address Filtering, DNS Filtering and MAC Filtering are enabled, their settings are ineffective. Figure 4-24 Firewall Settings ¾ Enable Firewall - the general firewall switch is on or off. ¾ Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. - 28 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
TL-R860
Cable/DSL Router User Guide
Click
Refresh
to update the Current UPnP Settings List.
4.7 Security
Figure 4-23 the Security menu
There are six submenus under the Security menu (shown in Figure 4-23):
Firewall
,
IP
Address Filtering, Domain Filtering, MAC Filtering, Remote Management
and
Advanced Security.
Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided
below.
4.7.1
Firewall
Using the Firewall page (shown in Figure 4-24), you can turn the general firewall switch
on or off. The default setting for the switch is off. If the general firewall switch is off, even
if IP Address Filtering, DNS Filtering and MAC Filtering are enabled, their settings are
ineffective.
Figure 4-24 Firewall Settings
¾
Enable Firewall
-
the general firewall switch is on or off.
¾
Enable IP Address Filtering
-
set IP Address Filtering is enabled or disabled.
- 28 -