TP-Link TL-SC3430 User Guide - Page 47
PPPoE
UPC - 845973054052
View all TP-Link TL-SC3430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
address of DNS server. z Primary DNS server: Enter the IP address of the primary DNS server. z Secondary DNS server: Enter the IP address of the secondary DNS server, if necessary. ¾ HTTP Port Number: Select 80 in general situations. If you want to use a port number other than 80, select the text box and enter a port number between 1024 and 65535. z When you have set the HTTP port number to a number other than 80 on the Network Setting screen in the Setup Program, access the device by typing the IP address of the device on the web browser as follows: Example: when HTTP port number is set to 2000 http://192.168.1.100:2000/ ) Note: 1) The IP Camera needs to be rebooted after it finishes changing the network setting completely. 2) If you connect the IP Camera with your computer directly, the default network domain of camera is 192.168.1.xx 7.3.2 PPPoE If your ISP provides Dynamic IP with authentication by username and password, type all PPPoE information in this part. When using the PPPoE function, you need to turn on the DDNS or IP Notification function at same time. ¾ IP Address: The IP address obtained at the PPPoE connecting with network. ¾ User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64 characters. ¾ Password: Enter the password for authentication necessary for PPPoE connections. Type it up to 32 characters. ¾ Re-type Password: Re-type the password to confirm. ¾ Obtain DNS server address automatically: Select this to obtain the address of DNS server automatically. ¾ Use the following DNS server address: Select this when you set the fixed address as the IP address of DNS server. 41