TP-Link TL-SC3430 User Guide - Page 69

¾ File Attachment: Set whether an image file is attached to the mail sent or not. When On is selected, the image file made by the settings below is attached. When Off is selected, only the message is sent. ¾ Image File Name: Type the file name you want to assign to the file attached to a mail. You can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming. ¾ Suffix: Select a suffix to add to the file name z None: The name of the sent file will be the Image file name. z Date & time: The date & time suffix is added to the Image file name. The date & time suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2 digits), thus 14-digit number is added to the file name. z Sequence number: A consecutive number is added to the Image file name. z Sequence number clear: Click Clear and the suffix of the sequence number returns to 1. ¾ Alarm z Motion Detection: Click it on for using Motion Detection function as a sensor. You can set motion detection function at the motion detection function screen. ) Note: You can set motion detection at motion detection screen. (Please go "Setting → Advanced → Motion Detection → Setting") For more details, you can check Chapter 9.6. z Audio Detection: Click it on for using Audio Detection function as a sensor. You can set audio detection function at the audio detection function screen. ) Note: You can set audio detection at audio detection screen. (Please go "Setting → Advanced →Audio Detection → Setting") For more details, you can check Chapter 9.7. z Network Link Down: Click it on to receive a snapshot or a video clip while network link down. If Attached File Type was clicked as video clip (go "Setting → Advanced → FTP Client → General") , you can using Alarm buffer function as a sensor. It's for recording audio file in the IP CAM before and after disconnected network. ) Note: You can set alarm buffer at alarm buffer screen. (Please go "Setting → Advanced → Alarm Buffer → Setting") For more details, you can check Chapter 9.5. ¾ Effective Period: Set the period when the periodical sending is effective. z Always: The periodical sending is always effective. z Schedule: You can specify the period when the periodical sending is effective in the Schedule setting in the other section. ) Note: You can set schedule function at schedule screen. (Please go "Setting → Advanced → Schedule → Setting") For more details, you can check Chapter 9.4. 8.2.3 Periodical Sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP server linked with setting period. 63