TP-Link TL-WA5110G User Guide - Page 25

Quick Setup, Operation Mode, Network - user manual

Get TP-Link TL-WA5110G PDF manuals and user guides
UPC - 845973051327
View all TP-Link TL-WA5110G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

SSID, Channel, Mode, and Wireless MAC address. 3. WAN These parameters apply to the WAN port of the router, including MAC address, IP address, Subnet Mask, Default Gateway and DNS server. If PPPoE is chosen as the WAN connection type, the Disconnect button will be shown here while you are accessing the Internet. You can also cut the connection by clicking the button. If you have not connected to the Internet, just click Connect to establish the connection. 4. Traffic Statistics This field displays the router's traffic statistics. 5. System Up Time The total up time of the router since it was powered on or reset. 4.3 Quick Setup Please refer to Section 3.2: "Quick Setup". 4.4 Operation Mode Selecting Operation Mode will allow you to choose the operation mode for the AP. The AP supports three operation mode types, AP Client Router, AP Router and AP. Please select the one your want as shown in Figure 4-2. Click Save to save your choice. Figure 4-2 Operation Mode ¾ AP Client Router - In this mode, the device enables multi-user to share the Internet from WISP. All LAN ports share the same IP from WISP through Wireless port. While connecting to WISP, the Wireless port works as a WAN port in AP Client mode. The Ethernet port acts as a LAN port. ¾ AP Router - In this mode, the device enables multi-user to share the Internet via ADSL/Cable Modem. The wireless port share the same IP to ISP through Ethernet WAN port. The Wireless port acts same as a LAN port while in AP mode. ¾ AP - In this mode, the device allows wireless communication devices to access a wireless network by using WIFI. The Ethernet port and the wireless port both work as LAN ports. 4.5 Network The Network option allows you to customize your local network manually by changing the default settings of the AP. There are three submenus under the Network menu (shown in Figure 4-3): LAN, WAN and MAC 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
17
SSID
,
Channel
,
Mode
, and
Wireless MAC address
.
3.
WAN
These parameters apply to the WAN port of the router, including
MAC address
,
IP address
,
Subnet Mask
,
Default Gateway
and
DNS server
. If PPPoE is chosen as the WAN connection
type, the
Disconnect
button will be shown here while you are accessing the Internet. You can
also cut the connection by clicking the button. If you have not connected to the Internet, just click
Connect
to establish the connection.
4.
Traffic Statistics
This field displays the router's traffic statistics.
5.
System Up Time
The total up time of the router since it was powered on or reset.
4.3
Quick Setup
Please refer to Section
3.2: "Quick Setup"
.
4.4
Operation Mode
Selecting
Operation Mode
will allow you to choose the operation mode for the AP. The AP
supports three operation mode types,
AP Client Router
,
AP Router
and
AP
. Please select the
one your want as shown in Figure 4-2. Click
Save
to save your choice.
Figure 4-2 Operation Mode
¾
AP Client Router -
In this mode, the device enables multi-user to share the Internet from
WISP. All LAN ports share the same IP from WISP through Wireless port. While connecting to
WISP, the Wireless port works as a WAN port in AP Client mode. The Ethernet port acts as a
LAN port.
¾
AP Router -
In this mode, the device enables multi-user to share the Internet via ADSL/Cable
Modem. The wireless port share the same IP to ISP through Ethernet WAN port. The Wireless
port acts same as a LAN port while in AP mode.
¾
AP -
In this mode, the device allows wireless communication devices to access a wireless
network by using WIFI. The Ethernet port and the wireless port both work as LAN ports.
4.5
Network
The
Network
option allows you to customize your local network manually by changing the default
settings of the AP.
There are three submenus under the Network menu (shown in Figure 4-3):
LAN
,
WAN
and
MAC