TP-Link TL-WR1043N TL-WR1043NEU V5 User Guide - Page 11
Smart Device, Computer, minutes, Method 1: Wired, Method 2: Wirelessly, Method 3: Use the WPS button
View all TP-Link TL-WR1043N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3. Turn on the modem, and then wait about 2 minutes for it to restart. 4. Connect the power adapter to the router and turn on the router. 5. Verify that the following LEDs are on and solid to confirm the hardware is connected correctly. Power On Wi-Fi On Internet On Note: If the Wi-Fi LED is off, press and hold the Wi-Fi/WPS button on the rear panel for more than 2 seconds to turn it on. 6. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable Wi-Fi/WPS • Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer Connections are available Smart Device < Settings Wi-Fi Wireless Network Connection TP-LINK_XXXX Connect automatically Connect Wi-Fi OR CHOOSE A NETWORK... TP-LINK_XXXX Other... • Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, most USB network cards, can be connected to your router through this method. Note: • WPS is not supported by iOS devices. 8