TP-Link TL-WR1043N TL-WR1043NEU V5 User Guide - Page 68
System Log, To Save the System Log in Local
View all TP-Link TL-WR1043N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
• Forbid all devices to manage the router remotely: Select Disable Remote Management and click Save. • Allow all devices to manage the router remotely: 1 ) Select Enable Remote Management for All Devices. 2 ) Enter Web Management Port (1024-65535 or 80). 3 ) Click Save. Devices on the Internet can log in to http://Router's WAN IP address:port number (such as http://113.116.60.229:1024) to manage the router. Tips: • You can find the WAN IP address of the router on Basic > Network Maps > Internet. • The router's WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. • Allow specific devices to manage the router remotely: 1 ) Select Enable Remote Management for Specified Devices. 2 ) Enter Web Management Port (1024-65535 or 80). 3 ) In Remote Management IP address, enter the IP address of the remote device to manage the router. 4 ) Click Save. Devices using this WAN IP can manage the router by logging in to http://Router's WAN IP:port number (such as http://113.116.60.229:1024). Tips: The router's WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. 11. 9. System Log When the router does not work properly, you can save the system log and send it to the technical support for troubleshooting. ¾¾ To Save the System Log in Local: 65