TP-Link TL-WR702N TL-WR702N V1 User Guide - Page 10
Panel Layout - 150mbps wireless n nano router
View all TP-Link TL-WR702N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1.4 Panel Layout TL-WR702N 150Mbps Wireless N Nano Router ¾ LED Figure 1-1 TL-WR702N sketch Status Indication Solid Flashing Slowly Flashing Quickly It's powered on but the LAN/WAN port is not connected. The LAN/WAN cable is connected but there is no data being transmitted or received. The LAN/WAN cable is connected and there is data being transmitted or received. Table 1-1 The LED Description ¾ LAN/WAN: This LAN/WAN port works as LAN in AP/Repeater/ Bridge/Client mode and as WAN in Router mode. As LAN, it connects the Router to the local PC; as WAN, it enables you connect the DSL/cable Modem, or Ethernet. ¾ Power: This port is used to connect the provided power adapter. ¾ Reset:It is used to reset the Router to its factory defaults. With the Router powered on, use a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings. - 4 -