TP-Link TL-WR702N TL-WR702N V1 User Guide - Page 19
AP Mode - bridge
View all TP-Link TL-WR702N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TL-WR702N 150Mbps Wireless N Nano Router 3. Click Next, and then Working Mode page will appear, shown in Figure 3-5. ) Note: Figure 3-5 Quick Setup - Working Mode The Router supports five working modes for multi-user to access the Internet: AP, Router, Repeater, Bridge and Client. In AP mode, TL-WR702N enables the wired LAN to connect to the Internet wirelessly. In Router mode, it can access the Internet via DSL/Cable Modem. In Repeater mode, the device will relay data to an associated root AP. In Bridge mode, the device bridges to another AP. In Client mode, the device will act as a wireless station to enable wired host(s) to access AP. You can configure your device quickly by the following steps in different modes. 3.2.1 AP Mode When you choose AP on Working Mode page in Figure 3-5 , take the following steps: 1. Click Next in Figure 3-5, and then Wireless AP page will appear as shown in Figure 3-6. - 13 -