TP-Link TL-WR841HP TL-WR841HP V1 User Guide - Page 22
TL-WR841HP, Static IP, IP Address, Subnet Mask, Default Gateway, Primary, Secondary DNS
View all TP-Link TL-WR841HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
TL-WR841HP 300Mbps High Power Router User Guide Figure 3-9 Quick Setup - MAC Clone 3) If the connection type detected is Static IP, the next screen will appear as shown in Figure 3-10. Figure 3-10 Quick Setup - Static IP IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address into the field. Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0. Default Gateway - Enter the gateway IP address into the box if required. Primary DNS - Enter the DNS Server IP address into the box if required. Secondary DNS - If your ISP provides another DNS server, enter it into this field. 4. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-11. - 13 -