TP-Link TL-WR841HP TL-WR841HP V1 User Guide - Page 46
Wireless MAC Filtering
![]() |
View all TP-Link TL-WR841HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
TL-WR841HP 300Mbps High Power Router User Guide 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. WPA /WPA2 - Enterprise - It's based on Radius Server. • Version - you can choose the version of the WPA security on the drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. • Encryption - You can select either Automatic, or TKIP or AES. Note: If you check the WPA /WPA2 - Enterprise radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-21. Figure 4-21 • Radius Server IP - Enter the IP address of the Radius server. • Radius Port - Enter the port number of the Radius server. • Radius Password - Enter the password for the Radius server. • Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. 4.6.3 Wireless MAC Filtering Choose menu "Wireless → MAC Filtering", you can control the wireless access by configuring the Wireless MAC Filtering function, shown in Figure 4-22. - 37 -
![](/manual_guide/products/tplink-tlwr841hp-tlwr841hp-v1-user-guide-3d41072/46.png)