TP-Link TL-WR841HP TL-WR841HP V1 User Guide - Page 27
Use the Wi-Fi Protected Setup Button
View all TP-Link TL-WR841HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
TL-WR841HP 300Mbps High Power Router User Guide Figure 4-2 WPS WPS Status - Enable or disable the WPS function here. Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the Router can be found in the label attached on the router. Restore PIN - Restore the PIN of the Router to its default. Gen New PIN - Click this button, and then you can get a new random value for the Router's PIN. You can ensure the network security by generating a new PIN. Add Device - You can add a new device to the existing network manually by clicking this button. b). To add a new device: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and Router using either Push Button Configuration (PBC) method or PIN method. Note: To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. I. Use the Wi-Fi Protected Setup Button Use this method if your client device has a Wi-Fi Protected Setup button. Step 1: Press the WPS/RESET button on the back panel of the Router for one second. You can also keep the default WPS Status as Enabled and click the Add Device button in Figure 4-2, then Choose "Press the button of the new device in two minutes" and click Connect. (Shown in the following figure) - 18 -