Home » TP-Link Manuals » Wireless » TP-Link WBS210 » Manual Viewer

TP-Link WBS210 WBS210 V1 Installation Guide

TP-Link WBS210 Manual

View all TP-Link WBS210 manuals

Add to My Manuals
Save this manual to your list of manuals

TP-Link WBS210 manual content summary:

TP-Link WBS210 | WBS210 V1 Installation Guide - Page 1
of TP-LINK TECHNOLOGIES TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2015 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. Website: http://www.tp-link.com Tel: +86 755 26504400 E-mail: [email protected] 7106505975 REV2.0.1 Installation Guide WBS210 / WBS510 Outdoor Wireless Base Station
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 2
Contents Overview 1 Hardware Installation 3 Connect cables 4 Mount Antenna 5 Power On 7 Lightning and ESD Protection 8 Configuration with PharOS 9 Log in to the PharOS 9 Configure the Base Station 10 Specification 12 FAQ 13
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 3
Overview TP-LINK's Outdoor Wireless Base Stations of the Pharos series products are designed for outdoor wireless network solutions, aiming at long-distance transmission and large coverage of wireless network. Package Contents Base Station Passive PoE Adapter Waterproof Rubber Insert Power Cord
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 4
Chain1 Chain0 RESET LAN1 LAN0(POE IN) GND Grounding Terminal Shielded Ethernet Port LAN1 Shielded Ethernet Port LAN0(POE IN) LED Explanation On: The Base Station is powered on. On: The port is connected but not active. Flashing: The port is transmitting data. AP/AP Router mode: All four
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 5
The Outdoor Wireless Base Stations require external antenna that corresponds to your network environment. It is recommended to buy and use TP-LINK's matching antennas. Recommended Antenna Type Dish Antenna Sector Antenna TP-LINK's Matching Antenna TL-ANT2424MD (2.4GHz) TL-ANT5830MD (5GHz) TL
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 6
insert to the underside of the device for waterproofing and replace the cover until it firmly locks into place. 4 Connect the RF Cables to the Base Station. 4
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 7
with a suitable mounting bracket or on a pole for the antenna without the mounting bracket. Option1: Mounting the Base Station on an Antenna Sector antenna is used as a demonstration below. 1 Align the mounting tabs on the back of the Base Station with the four slots of the mounting bracket. Push
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 8
the pole. Feed the end back through the screw-block and turn the screw clockwise to tighten the metal strap using a flathead screwdriver until the Base Station is secure. 4 Connect the RF cables from the Base Station to the corresponding connectors on the antenna. 6
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 9
to a Power over Ethernet (PoE) adapter as follows: 1 Connect the Ethernet cable from the Base Station to the POE port of the PoE adapter. 2 Connect an Ethernet cable from your LAN device (a computer, router or switch) to the LAN port on
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 10
Lightning and ESD Protection Proper grounding is extremely important for outdoor devices. There are two effective techniques for grounding the Base Station. Option A Use a shielded CAT5e (or above) cable with an integrated grounding wire for connection. Option B If you have the standard CAT5e cable
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 11
on your network needs, this section will guide you through the Base Station configuration using PharOS, a web-based management system that allows you to do more specific configurations. Log in to the PharOS 1 Before accessing the PharOS Web Interface, you need to assign a
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 12
. For subsequent logins, use the new username and password. Configure the Base Station The typical topology is as follows. A wireless bridge is built between two locations that are far from each other. Follow the instructions below to configure the Access Point and the Client. Access point LAN
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 13
Next. 3. LAN Settings: Change the IP Address to 192.168.0.X (X ranges between 2 and 253), the same subnet with the access point, and click Next. 4. Wireless Client Settings: a. Click Survey and select the SSID of the Access Point in the AP list, then click Connect. b. Select WPA-PSK/WPA2-PSK from
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 14
device to its factory defaults Chain0/Chain1: 2 RP-SMA antenna interfaces 24V passive PoE adapter included 15kV Up to 6kV -30¥~ 70¥ (-22⚻~158⚻) 10% ~ 90% CE, FCC, RoHS, IP65 11b/g/n (WBS210) 11a/n (WBS510) 1. Estimation is based on copper grounding cable and shielded CAT5e(or above) cable
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 15
on the Base Station or the Remote Reset button on the passive PoE adapter for about 8 seconds until the Wireless Signal Strength LEDs flash. Q2. What is Pharos MAXtream? Pharos MAXtream is a proprietary protocol developed on the basis of Time Division Multiple Access (TDMA) by TP-LINK. The MAXtream
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 16
in the tools drop-down list, a window will pop up to remind you that all wireless connections will be lost during spectrum analysis. Click Yes to continue to the Spectrum Analysis page. About Support Log Out Tools Ping Traceroute Speed Test Survey Spectrum Analysis 2. Click Start, the PharOS will
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 17
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. • Avoid water and wet locations. • Use only power
TP-Link WBS210 | WBS210 V1 Installation Guide - Page 18
NCC Notice & BSMI Notice 注意！ This product can be used in the following countries: AT / BG / BY / CA / CZ / DE / DK / EE / ES / FI / FR / GB / GR / HU / IE / IT LT / LV / MT / NL / NO / PL / PT / RO / RU / SE / SG / SK / TR / UA / US