TP-Link WBS210 WBS210 V1 Installation Guide - Page 12
Con the Base Station
![]() |
View all TP-Link WBS210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3 Enter admin for both User Name and Password, then select the Language from the drop-down list. Read and agree the terms of use, then click Login. 4 Change the default User Name and Password to protect your Base Station. Let's start configuring the Base Staion. For subsequent logins, use the new username and password. Configure the Base Station The typical topology is as follows. A wireless bridge is built between two locations that are far from each other. Follow the instructions below to configure the Access Point and the Client. Access point LAN:192.168.0.254 Client LAN:192.168.0.2 Configure the Access Point (AP) 1. Log in to PharOS and go to the Quick Setup page. 2. Operation Mode: Select Access Point and click Next. 3. LAN Settings: Click Next. 4. Wireless AP Settings: a. Create a new SSID (Network name) for your wireless network. b. Select WPA-PSK/WPA2-PSK for the Security method and create a PSK Password to protect your AP. c. Enter the distance between the Access Point and the Client into the Distance Setting field. d. Select the MAXtream checkbox (Refer to Q2 in FAQ for details about MAXtream), and click Next. 5. Finish: Verify your settings and click Finish to complete the configuration. 10
![](/manual_guide/products/tplink-wbs210-wbs210-v1-installation-guide-f745a35/12.png)