TRENDnet TEW-636APB User's Guide - Page 10
Check the LEDs, Status, Power, Front Panel LEDs - wireless n
UPC - 710931600308
View all TRENDnet TEW-636APB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation 2. Use a standard LAN cable to connect the "LAN" port on the Wireless Access Point to a 10/100BaseT hub/switch on your LAN. 3. Connect the supplied power adapter to the Wireless Access Point and a convenient power outlet, and power up. 4. Check the LEDs: • The Status LED should flash, then turn OFF. • The Power and WLAN LEDs should be ON. For more information, refer to Front Panel LEDs in Chapter 1. 7
Installation
7
2.
Use a standard LAN cable to connect the “LAN” port on the Wireless Access Point to a
10/100BaseT hub/switch on your LAN.
3.
Connect the supplied power adapter to the Wireless Access Point and a convenient power
outlet, and power up.
4.
Check the LEDs:
•
The
Status
LED should flash, then turn OFF.
•
The
Power
and
WLAN
LEDs should be ON.
For more information, refer to
Front Panel LEDs
in Chapter 1.