TRENDnet TEW-636APB User's Guide - Page 72
SNMP, Data - SNMP Screen, Read/Write Com
UPC - 710931600308
View all TRENDnet TEW-636APB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Access Point Management SNMP SNMP (Simple Network Management Protocol) is only useful if you have a SNMP program on your PC. To reach this screen, select SNMP in the Management section of the menu. Figure 59: SNMP Screen Data - SNMP Screen General SNMP Use this to enable or disable SNMP as required Read Only community Data can be read, but not changed. Read/Write Com- Data can be read, and setting changed. munity SNMPv3 User Name Enter the user name for SNMPv3. Authentication Protocol Select the authentication protocol used by SNMPv3. Authentication Key Enter the authentication key required by SNMPv3. Private Protocol Select the private protocol as required. Private Key Enter the private key here. Managers Any Station The IP address of the manager station is not checked. Only this station The IP address is checked, and must match the address you enter in the IP address field provided. If selected, you must enter the IP address of the required station. 71