TRENDnet TEW-636APB User's Guide - Page 61
Data - Status Screen, Access Point, TCP/IP, Wireless, Buttons
![]() |
UPC - 710931600308
View all TRENDnet TEW-636APB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Operation and Status Data - Status Screen Access Point Access Point Name The current name will be displayed. MAC Address The MAC (physical) address of the Wireless Access Point. Domain The region or domain, as selected on the System screen. Firmware Version The version of the firmware currently installed. TCP/IP IP Address The IP Address of the Wireless Access Point. Subnet Mask The Network Mask (Subnet Mask) for the IP Address above. Gateway Enter the Gateway for the LAN segment to which the Wireless Access Point is attached (the same value as the PCs on that LAN segment). DHCP Client This indicates whether the current IP address was obtained from a DHCP Server on your network. It will display "Enabled" or "Disabled". Wireless BSSID The BSSID currently in use is displayed. Channel/Frequency The Channel currently in use is displayed. Wireless Mode The current mode (e.g. 802.11g) is displayed. AP Mode The current Access Point mode is displayed. Buttons Virtual AP Status Click this to open a sub-window displaying Virtual AP Status about the information of Name, SSID, Broadcast SSID, Security, Status and Clients. Statistics Click this to open a sub-window where you can view Statistics on data transmitted or received by the Access Point. Log Click this to open a sub-window where you can view the activity log. Stations Click this to open a sub-window where you can view the list of all current Wireless Stations using the Access Point. 59
![](/manual_guide/products/trendnet-tew636apb-users-guide-a1e88ed/61.png)