TRENDnet TEW-636APB User's Guide - Page 38

Advanced Settings, Data - Advanced Settings Screen, Advanced Settings

Get TRENDnet TEW-636APB PDF manuals and user guides
UPC - 710931600308
View all TRENDnet TEW-636APB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Wireless Access Point User Guide Advanced Settings Clicking the Advanced Settings link on the Wireless menu will result in a screen like the following. Figure 23: Advanced Settings Data - Advanced Settings Screen Options Worldwide Mode (802.11d) Enable this setting if you wish to use this mode, and your Wireless stations support this mode. WMM Enable WMM Support Check this to enable WMM (Wi-Fi Multimedia) support in the Access Point. If WMM is also supported by your wireless clients, voice and multimedia traffic will be given a higher priority than other traffic. No Acknowledgement If enabled, then WMM acknowledgement is disabled. Depending on the environment, disabling acknowledgement may increase throughput slightly. Parameters Disassociated Timeout This determines how quickly a Wireless Station will be considered "Disassociated" with this AP, when no traffic is received. Enter the desired time period. Fragmentation Length Enter the preferred setting between 256 and 2346. Normally, this can be left at the default value. Beacon Interval Enter the preferred setting between 20 and 1000. Normally, this can be left at the default value. RTS/CTS Threshold Enter the preferred setting between 256 and 2346. Normally, this can be left at the default value. Preamble Type Select the desired option. The default is "Long". The "Short" setting takes less time when used in a good environment. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
Wireless Access Point User Guide
36
Advanced Settings
Clicking the
Advanced Settings
link on the Wireless menu will result in a screen like the fol-
lowing.
Figure 23: Advanced Settings
Data - Advanced Settings Screen
Options
Worldwide Mode
(802.11d)
Enable this setting if you wish to use this mode, and your Wire-
less stations support this mode.
WMM
Enable WMM Support
Check this to enable WMM (Wi-Fi Multimedia) support in the
Access Point. If WMM is also supported by your wireless
clients, voice and multimedia traffic will be given a higher
priority than other traffic.
No Acknowledgement
If enabled, then WMM acknowledgement is disabled. Depend-
ing on the environment, disabling acknowledgement may
increase throughput slightly.
Parameters
Disassociated Timeout
This determines how quickly a Wireless Station will be consi-
dered "Disassociated" with this AP, when no traffic is received.
Enter the desired time period.
Fragmentation Length
Enter the preferred setting between 256 and 2346. Normally,
this can be left at the default value.
Beacon Interval
Enter the preferred setting between 20 and 1000. Normally, this
can be left at the default value.
RTS/CTS Threshold
Enter the preferred setting between 256 and 2346. Normally,
this can be left at the default value.
Preamble Type
Select the desired option. The default is "Long". The "Short"
setting takes less time when used in a good environment.