TRENDnet TFM-560R Manual - Page 24
Result Code Options, Extended AT% Percent Command Set, Result Code Options Table
View all TRENDnet TFM-560R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
DCE speed \V1 * Enable protocol result code appended to DCE speed * Manufacturer default Extended "AT%" (Percent) Command Set Command %B Options %Cn %C0 %C1 * Function & Description View numbers in blacklist. If blacklisting is in effect, this command displays the numbers for which the last call attempted in the past two hours failed. The ERROR result code appears in the countries that do not require blacklisting. Data compression control No data compression V.42bis/MNP 5 data compression enabled. * Manufacturer default Extended "AT-" (Dash) Command Set Command -Cn Options -C0 * -C1 Function & Description Data calling tone options Disable data calling tone Enable data calling tone (the freq. is 1,300 Hz with a cadance of 0.5 sec. ON and 2 sec. OFF) * Manufacturer default 7.2 Result Code Options Result Code Options Table ATV0 ATV1 X0 X1 X2 X3 X4 X7 1-24