Thermador PODM301J Installation Instructions - Page 16

Service - manual

Get Thermador PODM301J PDF manuals and user guides View all Thermador PODM301J manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

To replace the oven door: 1. Hold the door firmly in both hands. 2. Hold the door at a 30º angle from the closed position and insert hinges into the slots. You may need to rock the door forward and backward slightly to seat the hinge feet. 3. The door may need to be removed and reinserted until the hinges sit correctly in the slots. 4. Open door all the way to expose hinges, levers, and slots. 5. Push levers foreward and down until seated on the bracket. 6. Close and open door slowly to be sure it is correctly and securely in place. Door must be straight, not crooked. Testing Operation 1. Turn on power at the breaker. 2. Test the oven mode. Select the BAKE mode. See the Use and Care Manual for detailed operation instructions. 3. Verify that the oven light comes on and the oven begins to preheat. 4. Test the door lock. Set the SELF CLEAN mode. Confirm that the door locks when the lock icon appears in the display. 5. If installing a double oven, test the second oven as well. 6. If any of the tests do not result as explained above, contact Thermador service for assistance. Otherwise, the installation is complete at this time. Service Before Calling Service See Use and Care Manual for troubleshooting information. Refer to the Warranty in the Use and Care Manual. To reach a service representative, see the contact information at the front of the manual. Please be prepared with the information printed on your product data plate when calling. Data Plate The data plate shows the model and serial number. Refer to the data plate on the appliance when requesting service. The data plate is located on the underside of the control panel: Data Plate English 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
English 14
To replace the oven door:
Testing Operation
1.
Turn on power at the breaker.
2.
Test the oven mode.
Select the
BAKE
mode. See the Use and Care Manual
for detailed operation instructions.
3.
Verify that the oven light comes on and the oven
begins to preheat.
4.
Test the door lock.
Set the
SELF CLEAN
mode. Confirm that the door
locks when the lock icon appears in the display.
5.
If installing a double oven, test the second oven as
well.
6.
If any of the tests do not result as explained above,
contact Thermador service for assistance. Otherwise,
the installation is complete at this time.
Service
Before Calling Service
See Use and Care Manual for troubleshooting information.
Refer to the Warranty in the Use and Care Manual.
To reach a service representative, see the contact
information at the front of the manual. Please be prepared
with the information printed on your product data plate
when calling.
Data Plate
The data plate shows the model and serial number. Refer
to the data plate on the appliance when requesting service.
The data plate is located on the underside of the control
panel:
1.
Hold the door firmly in
both hands.
2.
Hold the door at a 30ยบ
angle from the closed
position and insert
hinges into the slots.
You may need to rock
the door forward and
backward slightly to
seat the hinge feet.
3.
The door may need to
be removed and re-
inserted until the
hinges sit correctly in
the slots.
4.
Open door all the way
to expose hinges,
levers, and slots.
5.
Push levers foreward
and down until seated
on the bracket.
6.
Close and open door
slowly to be sure it is
correctly and securely
in place. Door must be
straight, not crooked.
Data Plate