Thermador PRD606WEG Instructions for Use - Page 48

5. Turn the mode knob to CONV BAKE and the TEMPERATURE knob to the recipe temperature. - The oven automatically reduces the input temperature by 25°F (10 °C) to the correct temperature. 6. Allow oven to preheat and place food inside. Fine tuning the oven About offset The offset feature allows the cook to further fine-tune their cooking parameters to their own personal optimal settings by allowing them to adjust the temperature offset of the oven by +/-35°F in increments of 5°F. This feature is useful if you find that food is consistently either too brown or too light for your tastes. • The offset feature is available for all modes except self-clean. • By default, the temperature is set at 0°. • The unit will continue to run the input offset value indefinitely until the user manually changes it, or until the unit loses power, in which case offset will need to be reset. To set offset 1. Begin from the STANDBY mode and select SETTINGS. 2. Press the left ( or ) to scroll TEMP OFFSET: RIGHT/ LEFT OVEN. 3. Press the right ( or ) to set the temperature. 4. Press ENTER. IMPORTANT: • To avoid damaging your meat probe, DO NOT pull on the cable when trying to remove it from a dish. • DO NOT use tongs or other instruments to pry on the probe when removing it or to 'hammer' the meat probe into a food dish. • To prevent possible burns, wait until the oven has cooled before trying to remove the meat probe from the outlet. • DO NOT store the probe inside the oven. For best results • To avoid damaging the probe, ensure that the meat is fully defrosted before inserting the meat probe. • Insert the meat probe until its tip is rested in the center of the thickest, meatiest portion of the meat. Ensure that the meat probe does not touch bone, fat, or gristle. • For poultry, the meat probe should be inserted into the interior thigh muscle. • The meat probe should not touch any part of the cooking dish or parts of the oven, as this will affect the accuracy of the results. To program the meat probe 1. Insert the plug end into the probe outlet in the oven wall and insert meat probe end into the meat. b a c Meat probe About the meat probe The meat probe allows you more control over how your foods are cooked by automatically disabling the specified cooking mode when a dish's desired temperature, defined by the cook, has been reached. The meat probe expresses the current temperature of the meat as it cooks. The following are the heating modes that work with the meat probe: • Bake • Convection bake • Roast • Convection roast The meat probe will not work with the oven timer or with the end timer. d a. Probe c. Outlet b. Plug d. Cable 2. Close the oven door. 3. Turn the MODE and TEMPERATURE knobs to your desired settings. Page. 46