Thermador T18ID905RP Instructions for Use - Page 19
Home Connect
View all Thermador T18ID905RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
o Home Connect This HomeConect appliance is Wi-Fi-capable and can be controlled remotely using a mobile device. Note: Wi-Fi is a registered trade mark of the Wi-Fi Alliance. In the following cases, the appliance functions like a refrigerator without a network connection and can still be operated manually via the controls: ■ The appliance is not connected to a home network. ■ The availability of the Home Connect function depends on the availability of Home Connect services in your country. Home Connect services are not available in every country. You can find more information on www.home-connect.com. Note: Please observe the safety information in this instruction manual. Ensure that this is also observed if you operate the appliance via the Home Connect app and are not at home when doing so. ~ "Important safety instructions" on page 4 Follow the instructions in the Home Connect app as well. Setting up a home network Notes ■ Wait at least 2 minutes after switching on the appliance before setting up Home Connect. Only then is internal appliance initialization complete. ■ Take note of the Home Connect supplementary sheet, which is supplied with the appliance or is available for download at www.thermador.com together with the instructions. Enter the E-number of your appliance in the search field. You can connect your appliance to the home WLAN network (Wi-Fi) in 3 basic steps. 1. Install the app. 2. Connect your refrigerator to the home WLAN network (Wi-Fi). 3. Connect the refrigerator to the Home Connect app. The first time you open the menu, you will be automatically guided through initial setup. Follow the instructions on the control panel. For further information, please also see the following chapters. The following sub-menus can be found in the Home network menu: ■ Connection ■ Connect to app ■ Software update ■ Delete network settings Open Home network menu 1. To open the Settings menu, press the " button. 2. Use ( button to move to the menu item Appliance settings. 3. Press 8 button. 4. Press ( button to move to the menu item WiFi. Home Connect en-us 5. Press : button. Note: The first time you open the menu, you will be automatically guided through initial setup. Follow the instructions on the control panel. Setting up the connection to the home network The first time you open the menu, you will be automatically guided through initial setup. Follow the instructions on the control panel. 1. Install the Home Connect app on your mobile device. 2. Open the Home network menu on your refrigerator. 3. Open the app on your mobile device. 4. Log in or register with the app if access is not yet available. 5. Check the router of your home network to see if a WPS function is available for automatic connection. 6. If this function is available, start automatic network connection with 8 button. Follow the instructions on the control panel. 7. Start manual network connection if this function is not available, if you're not sure whether the function is available, or if automatic network connection failed. The refrigerator temporarily generates its own network for connecting the mobile device. 8. Start manual network connection in the app of your mobile device. As soon as the refrigerator is connected to the mobile device, a connection between the refrigerator and your home network is established. Note: If the connection cannot be established, check whether there is sufficient reception. ~ "Verifying signal strength" on page 19 Verifying signal strength The signal strength is displayed in the start window of the Home network menu.The signal strength should be at least 50 %. If the signal strength is too weak, the connection may be interrupted. Improving signal strength ■ Place the router closer to the refrigerator. ■ Check that screening walls do not interfere with the connection. ■ Install a repeater to make the signal stronger. Connecting the refrigerator to the Home Connect app Use this menu to connect your refrigerator to mobile terminal devices. 1. Install the Home Connect app on your mobile terminal device and log in or register. 2. Open the Home network menu on your refrigerator. 3. Press ) button to move to the menu item Connect to app. 4. Press : button to open the menu item. 19
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90