Thermador T18ID905RP Instructions for Use - Page 7
Intended use, Environmental protection, Installation and, connection
View all Thermador T18ID905RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
8Intended use Use Intendeduse this appliance ■ only for freezing food, making ice and dispensing drinking water. ■ only in the home and in the home environment. ■ only according to these operating instructions. This appliance is intended for use at an elevation of no more than 2000 meters above sea level. 7Environmental protection Packaging Environmental protection All materials are environmentally safe and recyclable: ■ Dispose of packaging in an environmentally responsible manner. ■ Please ask your dealer or inquire at your local authority about current means of disposal. Old appliances Valuable raw materials can be reclaimed by recycling old appliances. 9 WARNING CHILDREN MAY BECOME LOCKED IN THE APPLIANCE AND SUFFOCATE! Before disposing of your old appliance: ■ Remove the door. ■ Leave shelves and bins in the appliance to prevent children from climbing in. ■ Keep children away from the discarded appliance. 9 CAUTION REFRIGERANT AND HARMFUL GASES MAY ESCAPE. Do not damage the tubes of the refrigeration circuit and insulation. 1. Pull out the power plug. 2. Cut through the power cord. 3. Have the appliance disposed of properly. Intended use en-us 5 Installation and connection Contents of package Instalationandconection After unpacking all parts, check for any damage during transport. If you have any complaints, please contact the dealer from whom you purchased the appliance or our customer service. ~ "Customer service" on page 28 The delivery consists of the following parts: ■ Built-in appliance ■ Equipment (depending on model) ■ Installation material ■ Instruction manual ■ Installation instructions ■ Customer service booklet ■ Warranty enclosure ■ Information on the energy consumption and noises Technical data Refrigerant, cubic capacity and further technical specifications can be found on the rating plate. ~ "Getting to know your appliance" on page 10 Installing the appliance Installation location The weight of the appliance may be up to 460 kg depending on the model. The base must be sufficiently stable and should not give. If necessary, reinforce the floor. Check built-in cut-out The cut-out must fulfill these criteria: ■ Anti-tilt bracket must be fitted ■ Cut-out depth min. 24" (610 mm), for flush installation 25" (635 mm) ■ rectangular ■ stable - the side panels and the top must be min. 5/8" (16 mm) thick and securely attached to the floor or wall ■ Depth of shortest side panels min. 4" (100 mm) Side-by-side installation Observe the specifications in the installation instructions for a side-by-side installation. If a partition wall is required between the appliances it must be at least 5/8" (16 mm) wide. 7
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90