Toshiba 32BV700B Owners Manual - Page 12

Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the right side of the television may be used for some functions. On/Off Switch Standby LED Menu OSD Volume Programme AV/ Standby Down/Up Down/Up Source Switching on If the standby LED is unlit, check that the mains plug is con- nected to the power and press the button on the left side of the television to switch the television on. Then the LED lights up white. If the picture does not appear, press on the remote control; it may take a few moments. To put the television into Standby, press on the remote control. To view the television, press again. The picture may take a few seconds to appear. Note: The active Standby LED may appear for a few moments when the TV is switched off. Note: A beeping sound will be heard when the buttons are pressed. This is normal operation, not a fault. For energy saving: Turning the television off at its mains supply, or un-plugging it, will cut energy use to nearly zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills. NOTE: Putting the television into standby mode, will reduce energy consumption, but will still draw some power. Using the Remote Control Press the MENU button on the remote control to see the menus. In analogue TV mode the menu appears as a group of icons each for a menu option. Press the Left or Right button to select a topic. In digital TV mode the menu appears as a list. Press the Up or Down button to select a topic. To use the options press the Up and Down buttons on the remote control to move up and down through them and OK, Left or Right buttons to select the required choice. Follow the on screen instructions. The functions of each menu are described in detail throughout the manual. Using the Controls and Connections on the TV Using the control buttons on the front of the TV: • To alter the volume press + -. • To alter the programme position press - P/CH + on the right side of the TV. • Press + - buttons at the same to view main menu and use - P/CH + to navigate and + - to change value. NOTE: The USB socket has limited functionality, and Toshiba can take no responsibility for damage to other connected equipment. To select an external input, press SOURCE until the appropriate input source is selected. Please always refer to the owner's manual of the equipment to be connected for full details. English - 11 - 00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068434_v1.indd 11 10.03.2011 14:14:57