Toshiba 32BV700B Owners Manual - Page 14

Auto Tuning, Manual Tuning

Page 14 highlights

Auto Tuning , continued Manual Tuning The television can be tuned-in manually using Manual Tuning feature. • Repeat as necessary. Note: Press SOURCE button to switch between TV/ DTV. Analogue Manual Tuning The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. To allocate a programme position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film into the media recorder and press PLAY, then manually tune. • Press MENU and using the Left or Right button select Install menu. • Select your Country, Language and Text language by using " " or " " and " " or " " buttons. Press "OK" or RED button to continue. To cancel, press BLUE button. The following menu will be displayed during the automatic tuning: • After APS is finalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes. Digital Manual Tuning The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. • Select Channel Search from the Installation menu and press OK. • Enter the multiplex number using the numeric buttons. The television will automatically search for that multiplex. When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated. • Using the Down button select Program and key in the programme position to be tuned with the number buttons, we suggest Programme 0 for a media recorder. • Use the Down button to select Search then press the Left or Right button to search. The television will begin searching for channels. • Each signal will show on the television, if it is not your media recorder press the Left or Right button to restart the search. • When your media recorder signal is found, save the selection by pressing the Down button until Store is highlighted, then press the Left/Right or OK button to save. • Repeat for each programme position to be tuned then press BACK to finish. Note: Press SOURCE button to select between TV or DTV. English - 13 - 00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068434_v1.indd 13 10.03.2011 14:14:57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

English
- 13 -
Select your
Country
,
Language
and
Text language
by using “
” or “
and
” or “
” buttons. Press
OK”
or
RED
button to continue. To cancel, press
BLUE
button. The following menu will be displayed
during the automatic tuning:
After APS is
nalized, the programme table will
appear on the screen. In the programme table
you will see the programme numbers and names
assigned to the programmes.
Digital Manual Tuning
The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.
Select
Channel Search
from the
Installation menu
and press
OK.
Enter the multiplex number using the numeric
buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.
Repeat as necessary.
Note: Press
SOURC
E
button to switch between TV/
DTV.
Analogue Manual Tuning
The television can be tuned-in manually. For example:
if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a
station on another System.
To allocate a programme position on the television
for a decoder and media recorder: turn the decoder
on, insert a pre-recorded
lm into the media recorder
and press PLAY, then manually tune.
Press
MENU
and using the Left or Right button
select
Install
menu.
Using the
Down
button select
Program
and key
in the programme position to be tuned with the
number buttons, we suggest
Programme 0
for a
media recorder.
Use the Down button
to select
Search
then press
the Left or Right button to search. The television will
begin searching for channels.
Each signal will show on the television, if it is not
your media recorder press the
Left
or
Right
button
to restart the search.
When your media recorder signal is found, save
the selection by pressing the
Down
button until
Store
is highlighted, then press the
Left/Right
or
OK
button to save.
Repeat for each
programme position
to be tuned
then press
BACK
to
nish.
Note: Press
SOURCE
button to select between TV
or DTV.
Auto Tuning
continued
, Manual Tuning
The television can be tuned-in manually using Manual Tuning feature.
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068434_v1.indd 13
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068434_v1.indd
13
10.03.2011 14:14:57
10.03.2011
14:14:57