Toshiba 42DPC85 User Manual - Page 7

Introduction Connecting your Monitor Introduction Welcome to Toshiba Thank you for purchasing this Toshiba plasma monitor. The goal of this manual is to guide you through setting up and operating your Toshiba monitor as quickly as possible. The model and serial numbers are on the back of your monitor. Write these numbers in the space provided on the front cover of this manual for your records. Instructions in this manual are based on using the remote control. You also can use the controls on the monitor if they have the same name as those referred to on the remote control. Please read all the safety and operating instructions carefully, and keep this manual for future reference. NOTE: THIS MONITOR DOES NOT CONTAIN A TUNER. A set-top box (i.e., cable box or analog/ digital receiver) is required to receive: (1) analog and/or digital broadcast signals from an antenna; and (2) analog and/or digital cable. For more information, refer to the applicable connection and setup. Supplied accessories Check that you have the accessories and items shown. Owner's Manual (This book) Remote control CT-90232 Batteries for the remote control LR6 (AA) × 2 Using the remote control Setting up your Monitor Operating your Monitor Appendix Power cord* (three wire grounding type) Noise filter Clip Noise filter-1 ZCAT2436-1330A-M (see page 14) Use this clip to attach the monitor to a wall, pillar, or other immovable structure. See item 19 on page 3. Noise filter-2 ZCAT3035-1330 (see page 14) * The power cord supplied with this product is to be used in the United States and Canada only. If this product is used in another country, use a power cord which conforms to the laws or regulations of that country. Do not remove the noise filter from the power cord. The noise filter is used to reduce the interference in image or sound of other electronic equipment. 7 #01E07-08_42DPC85 7 Black (E)42DPC85 (size 213*276) 05.9.12, 7:46 PM Index