Toshiba BDX1100KU Owners Manual - Page 18

English Display Setting 1. Press SETUP [General Setting] menu is displayed. 2. Press  to select [Display Setting], then press  . 3. Select an option, press  to access. ... Display Setting... TV Video Process Motion Vide... TV Screen Resolution Color Space HDMI Deep Color HDMI 1080P 24F 16:9 Normal 480I/576I YCbCr422 Off On Move cursor key to select menu option then use "OK" key to select SETUP Exit 4. Press / to select a setup option and press  5. Select the setting you wish to change and press OK to confirm. - Press  to return to the previous menu. - Press SETUP to exit the menu. [TV] • [TV Screen] Select the screen format according to how you want the picture to appear on the TV. {16:9 Full} - for a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen. {16:9 Normal} - for a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display. {4:3 Pan&Scan} - for standard TV, Display a wide picture on the entire screen and cuts off the redundant portions. {4:3 Letterbox} - for standard TV, Display a wide picture with two black borders on the top and bottom of 4:3 screen. • [Resolution] Select a video output resolution that is compatible with your TV display capability. {Auto} - Select the most suitable resolution according to the TV . {480I/576I}, {480P/576P}, {720P}, {1080I}, {1080P} - Select a video resolution setting that is best supported by the TV. See TV manual for details. Note: -When resolution is set to 720p/1080i/1080p: (1) If only CVBS connected, the resolution of CVBS video output will be set to 480i/576i automaticlly. (2) If HDMI and CVBS are both connected, there will be no CVBS video output, instead, a message will be shown as follows: Out Of Range:Check Display Resolution • [Color Space] Select a predefined Color space of picture. {RGB} - select RGB Color space. {YCbCr} - select YCbCr Color space. {YCbCr422} - Select YCbCr422 Color space. {Full RGB} - select Full RGB Color space. • [HDMI Deep Color] This feature is available only when the display device is connected by a HDMI cable, and when it supports deep Color feature. {30 bits} - Output 30 bits Color. {36 bits} - Output 36 bits Color. {Off} - Output standard 24 bit Color. Note: -When the color space is "YCbCr422", even if HDMI Deep Color is set to 30bits/36bits, it is not output with Deep Color. • [HDMI 1080p 24F] {On} - Enable 1080p 24F video resolution setting. {Off} - Disable 1080p 24F video resolution setting. About HDMI 1080p 24F Notes: If you want the 24Hz output, it should fulfill below 3 conditions: 1.TV supports the 24Hz display: 2.Player choose the 24Hz option in the setup menu; 3.Media must be the 24Hz video. Notes: - This resolution becomes effective only when the playing BD-Disc contents are Film source: - During HDMI 1080p 24F playback, there will be no composite output. [Video Process] ... Display Setting... TV Video Process Motion Video... Video Adjust Sharpness More... Low Move cursor key to select menu option then use "OK" key to select SETUP Exit 18