Toshiba DP30A Instruction Manual - Page 13

<camera Setup&gt, <pan/tilt Setup&gt, <preset Titles&gt, <others&gt, <focus&gt, <

Page 13 highlights

6.7.2 WHITE BALANCE CONTROL Direct • The White Balance can be set by One Push Trigger operation. Menu MAIN MENU CAMERA MENU EXIT WB ATW ZOOM LIMIT X18 SHARPNESS 10 PRIVACY ZONE The White Balance can be set to ATW (Auto Tracking White)/AUTO/ONE PUSHWB. • ATW automatically adjusts the white balance for color temperatures from 2000K to 10000K. • AUTO automatically adjusts the white balance for color temperatures from 3000K to 7500K. • ONE PUSH WB can be set using 73 PRESET from a controller. To change the White Balance: 1. Enter the preset command to access the main menu. Refer to section 6.1 for the controller model and preset command. 2. Position the cursor ( ) next to CAMERA SETUP and press the OPEN button to access the Camera menu. 3. Position the cursor next to WB and press the OPEN button to move the cursor to the right. 4. Move the joystick up or down to select ATW, AUTO, or ONE PUSH WB. 5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE button. 6.7.3 AE CONTROL Direct • The Iris can be controlled directly using OPEN or CLOSE controls. Menu MAIN MENU CAMERA MENU AE MENU EXIT WB ATW ZOOM LIMIT X18 SHARPNESS 10 PRIVACY ZONE MODE FULL AUTO AUTO SLOW SHUTTEROFF SHUTTER SPEED 1/60 AE COMPENSATION 0 BACK LIGHT COMP OFF DAY/NIGHT AUTO Downloaded from www.Manualslib.com manuals search engine - 13 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

- 13 -
6.7.2
WHITE BALANCE CONTROL
Direct
The White Balance can be set by One Push Trigger operation.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
<FOCUS>
WB
ATW
<AE>
ZOOM LIMIT
X18
SHARPNESS
10
<LINE LOCK>
PRIVACY ZONE
CAMERA MENU
The White Balance can be set to ATW (Auto Tracking White)/AUTO/ONE PUSHWB.
ATW automatically adjusts the white balance for color temperatures from 2000K to 10000K.
AUTO automatically adjusts the white balance for color temperatures from 3000K to 7500K.
ONE PUSH WB can be set using 73 PRESET from a controller.
To change the White Balance:
1.
Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor (
) next to CAMERA SETUP and press the OPEN button to access the
Camera menu.
3.
Position the cursor next to WB and press the OPEN button to move the cursor to the right.
4.
Move the joystick up or down to select ATW, AUTO, or ONE PUSH WB.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.7.3
AE CONTROL
Direct
The Iris can be controlled directly using OPEN or CLOSE controls.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
<FOCUS>
WB
ATW
<AE>
ZOOM LIMIT
X18
SHARPNESS
10
<LINE LOCK>
PRIVACY ZONE
CAMERA MENU
MODE
FULL AUTO
AUTO SLOW SHUTTEROFF
SHUTTER SPEED
1/60
AE COMPENSATION
0
BACK LIGHT COMP
OFF
DAY/NIGHT
AUTO
AE
MENU
Downloaded from
www.Manualslib.com
manuals search engine