Toshiba DP30A Instruction Manual - Page 18

Pan/tilt Setup - ptz

Page 18 highlights

Notes: 1) Masking areas are only rectangles. 2) When using the PTZ function the privacy zone expands 2x vertically and 4x horizontally. 3) Although the privacy zone works in digital zoom, the zone setting is only available in a non- digital zoom area. 4) It is recommended to set privacy zone bigger than actual masking area. 5) During turbo panning or tilting, the privacy zone may shift depending on the location of the zone. 6.8 PAN/TILT SETUP 6.8.1 AUTO FLIP The Auto Flip feature allows the tilt to rotate 180 degrees and reposition itself for continuous viewing of a moving object directly beneath the dome. Menu MAIN MENU EXIT PAN/TILT MENU AUTO FLIP ON PROPORTIONALP/T ON SCAN LIMIT STOPS OFF MANUAL LIMIT STOPS OFF PARK TIME MIN 0MIN AUTO PATROL P1ˠOFF SCAN SPEED 5DEG./S SCAN TILT ANGLE 30DEG. STOP TIME 10SEC MAX SPEED 400DEG/S To enable AUTO FLIP: 1. Enter the preset command to access the main menu. Refer to section 6.1 for the controller model and preset command. 2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/ Tilt menu. 3. Position the cursor next to AUTO FLIP and press the OPEN button to move the cursor to the right. 4. Move the joystick up or down to select ON or OFF. 5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE button. Downloaded from www.Manualslib.com manuals search engine - 18 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

- 18 -
Notes:
1) Masking areas are only rectangles.
2) When using the PTZ function the privacy zone expands 2x vertically and 4x horizontally.
3) Although the privacy zone works in digital zoom, the zone setting is only available in a non-
digital zoom area.
4) It is recommended to set privacy zone bigger than actual masking area.
5)
During turbo panning or tilting, the privacy zone may shift depending on the location of the zone.
6.8
PAN/TILT SETUP
6.8.1
AUTO FLIP
The Auto Flip feature allows the tilt to rotate 180 degrees and reposition itself for continuous
viewing of a moving object directly beneath the dome.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
PAN/TILT MENU
AUTO FLIP
ON
PROPORTIONALP/T
ON
SCAN LIMIT STOPS
OFF
MANUAL LIMIT STOPS
OFF
PARK TIME MIN
0MIN
AUTO PATROL P1
OFF
SCAN SPEED
5DEG./S
SCAN TILT ANGLE
30DEG.
STOP TIME
10SEC
MAX SPEED
400DEG/S
To enable AUTO FLIP:
1.
Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2.
Position the cursor (
) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to AUTO FLIP and press the OPEN button to move the cursor to the
right.
4.
Move the joystick up or down to select ON or OFF.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
Downloaded from
www.Manualslib.com
manuals search engine