Toshiba DP30A Instruction Manual - Page 19

Main Menu, Pan/tilt Menu

Page 19 highlights

6.8.2 PROPORTIONAL P/T Proportional P/T controls the pan and tilt speeds according to the amount of zoom. At telephoto settings, the pan and tilt speeds will be slower to keep the image from moving too fast on the monitor. Menu MAIN MENU EXIT PAN/TILT MENU AUTO FLIP ON PROPORTIONALP/T ON SCAN LIMIT STOPS OFF MANUAL LIMIT STOPS OFF PARK TIME MIN 0MIN AUTO PATROL P1ˠOFF SCAN SPEED 5DEG./S SCAN TILT ANGLE 30DEG. STOP TIME 10SEC MAX SPEED 400DEG/S To enable PROPORTIONAL P/T: 1. Enter the preset command to access the main menu. Refer to section 6.1 for the controller model and preset command. 2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/ Tilt menu. 3. Position the cursor next to PROPORTIONAL P/T and press the OPEN button to move the cursor to the right. 4. Move the joystick up or down to select ON or OFF. 5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE button. 6.8.3 SCAN LIMIT STOPS When a Scan Limit Stop is reached during random, frame or auto scan, the dome camera will reverse direction. A Left Scan Limit Stop and Right Scan Limit Stop can be set. The limit stops must be greater than 10 degrees apart. Menu MAIN MENU EXIT PAN/TIL T MENU AUTO FLIP ON PROPORTIONALP/T ON SCAN LIMIT STOPS OFF MANUAL LIMIT STOPS OFF PARK TIME MIN 0MIN AUTO PATROL P1ˠOFF SCAN SPEED 5DEG./S SCAN TILT ANGLE 30DEG. STOP TIME 10SEC MAX SPEED 400DEG/S Downloaded from www.Manualslib.com manuals search engine - 19 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

- 19 -
6.8.2
PROPORTIONAL P/T
Proportional P/T controls the pan and tilt speeds according to the amount of zoom.
At telephoto settings, the pan and tilt speeds will be slower to keep the image from moving too fast
on the monitor.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
PAN/TILT MENU
AUTO FLIP
ON
PROPORTIONALP/T
ON
SCAN LIMIT STOPS
OFF
MANUAL LIMIT STOPS
OFF
PARK TIME MIN
0MIN
AUTO PATROL P1
OFF
SCAN SPEED
5DEG./S
SCAN TILT ANGLE
30DEG.
STOP TIME
10SEC
MAX SPEED
400DEG/S
To enable PROPORTIONAL P/T:
1.
Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2.
Position the cursor (
) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to PROPORTIONAL P/T and press the OPEN button to move the
cursor to the right.
4.
Move the joystick up or down to select ON or OFF.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.8.3
SCAN LIMIT STOPS
When a Scan Limit Stop is reached during random, frame or auto scan, the dome camera will
reverse direction. A Left Scan Limit Stop and Right Scan Limit Stop can be set. The limit stops
must be greater than 10 degrees apart.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
PAN/TIL
T MENU
AUTO FLIP
ON
PROPORTIONALP/T
ON
SCAN LIMIT STOPS
OFF
MANUAL LIMIT STOPS
OFF
PARK TIME MIN
0MIN
AUTO PATROL
P1
OFF
SCAN SPEED
5DEG./S
SCAN TILT ANGLE
30DEG.
STOP TIME
10SEC
MAX SPEED
400DEG/S
Downloaded from
www.Manualslib.com
manuals search engine