Toshiba RD-XS32SU Owners Manual - Page 172
Specification
View all Toshiba RD-XS32SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Others Specification I Power requirement during operation 45W I Power requirement at standby 2.7W or below (Eco mode: off) 0.8W or below (Eco mode: on) I Power supply 120V AC, 60 Hz I Mass 4.2kg I External dimension Width 430 x Height 78 x Depth 325mm I Incoming channels TV: 2-69CH, Cable:1-125CH I Antenna input/output terminal VHF/UHF: 75Ω, F Connector I Signal system Standard NTSC Color TV system I Laser Semiconductor laser, Wavelength: 650nm/780nm I Format DVD-VR format DVD-Video format I Image recording system MPEG2 I Sound recording system Dolby Digital M1, M2, Linear PCM I VIDEO input 1.0Vp-p (75Ω), Sync signal negative, Pin jack x 2 systems, 2 at rear, 1 in front I VIDEO output 1.0Vp-p (75Ω), Sync signal negative, Pin jack x 2 systems, 2 at rear I S-VIDEO input (Y) 1.0Vp-p (75Ω), Sync signal negative, Mini DIN4 Pin x 3 systems (C) 0.286Vp-p (75Ω), 2 at rear, 1 in front I S-VIDEO output (Y) 1.0Vp-p (75Ω), Sync signal negative, Mini DIN4 Pin x 2 systems (C) 0.286Vp-p (75Ω), 2 at rear I COMPONENT output (Y, PB, PR) Y output (green), 1.0Vp-p (75Ω), Sync signal negative, Pin jack x 1 system PB, PR output (blue, red), 0.7Vp-p (75Ω), Pin jack x 1 system each I AUDIO input 2.0V (rms), 50kΩ or below, pin jack (L, R) x 3 systems 2 at rear, 1 in front I AUDIO output 2.0V (rms), 200Ω or above, pin jack (L, R) x 2 systems 2 at rear I DIGITAL AUDIO OUTPUT BITSTREAM/PCM (OPTICAL terminal) Optical connector x 1 system I DIGITAL AUDIO OUTPUT BITSTREAM/PCM (COAXIAL terminal) 0.5Vp-p (75Ω), pin jack x 1 system I CHANNEL CHANGE IR jack This is for connection of the supplied IR control cable only. I DV input 4-pin x 1 in front 172