Toshiba SD-4960 User Manual - Page 16

Toshiba-SD-4960(gb) 5/19/04 10:50 AM Page 30 Setting Up the Audio Options Surround Sound Speaker Setup DTS 1. Off : Doesn't output digital signal. 2. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. Note There is no analog audio output when you play DTS sound disc. Dynamic Compression 1. On : To select dynamic compression. 2. Off : To select the standard range. PCM Down Sampling 1. On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ. 2. Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes. Speaker Setup Note • How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button. • Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. • "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. • DVD-AUDIO - Outputs two channel digital audio only. - Some DVD-AUDIO discs do not downmix, so they will not output 2 channel digital audio. - MULTI channel DVD-AUDIO discs play back through the analog outputs. • SACD Outputs analog signals only. 1. With the unit in Stop mode, press the SETUP button. 2. Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 3. Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Use the UP/DOWN buttons to select Speaker Setup. Then press the RIGHT or ENTER button. Digital Output DTS Dynamic Compression PCM Down Sampling Speaker Setup AUDIO SETUP : PCM : Off : On : On 5. Use the UP/DOWN or LEFT/RIGHT buttons to select the desired item. Then press the ENTER button. SPEAKER SETUP On ENG-30 Surround Sound Speaker Setup Setting Up the Display Options The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small) Select the size of the speakers to be connected. • Front (FL, FR) - Large: Normally select this. - Small: When the sound distorts or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the speaker from the subwoofer. • Center - None: If you do not connect a center speaker, select this. - Large: Normally select this. - Small: When the sound distorts, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers. • Surround (SL, SR) - None: If you do not connect a surround speaker, select this. - Large (Rear/Side): Normally select either of these according to the rear speaker's position. - Small (Rear/Side): When the sound distorts or the surround sound effects are difficult to hear, select either of these according to the rear speaker's position. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers. Setting up TEST The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system. FRONT(L) ➝ CENTER ➝ SUBWOOFER(LFE) ➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L) Note How to make the SETUP menu disappear or return to menu screen during set up. Press RETURN or LEFT button. • The subwoofer test output signal is lower than the other speakers. • The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation. • If you Set Front (FL, FR) "Small", LFE (Subwoofer) is sat "On" automatically. 1. With the unit in Stop mode, press the SETUP button. 2. Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 3. Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button. TV Aspect Still Mode Screen Messages Black Level Video Output DISPLAY SETUP : Wide : Auto : On : On : S-Video TV Aspect Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio). 1. 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. 2. 4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) 3. 16:9 Wide : You can view the full 16:9 picture on your widescreen TV. ENG-31