Toshiba Satellite Pro U300 Maintenance Manual - Page 216
Removing the audio board, touch pad, plate, screws, insulator, flat cable, glass tape, USB cable
View all Toshiba Satellite Pro U300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Replacement Procedures NOTE: Do not reuse the touch pad so that it can not be used after peeling off from the computer. Be sure to stick a new touch pad. When sticking the touch pad, be careful not to get the bubbles under the touch pad. 2. Stick and install the touch pad on the cover assembly. 3. Install the touch pad plate and secure it with the following screws. • M2.0×3.0B SUPER THIN HEAD screw x6 4. Stick the insulator on the touch pad plate. 5. Connect the touch pad flat cable to the connector on the touch pad and stick the glass tape on the connector. 4.12 Audio Board The following describes for removing the cover assembly (See Figure 4-23). Removing the audio board 1. Pull out the USB cable, speaker cable, and audio FFC cable from audio board connector. 2. Loose the below screws and then incline pull out audio board. z M2.0x4.0 FLAT BIND screw x1 Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08) 4-39