Toshiba Satellite Pro U300 Maintenance Manual - Page 84
Procedure 5, Connector Check and Replacement Check, instructions
View all Toshiba Satellite Pro U300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check HDD(s) is/are connected to the connector(s) on the system board. The connection of HDD(s) and board may be defective. Otherwise, they may be faulty. Disassemble the computer following instructions in Chapter 4, Replacement Procedures and perform the following checks. Check 1 Make sure HDD(s) is/are firmly connected to the connector(s) on the system board. If any of the connections are loose, reconnect firmly and repeat Procedure 1. If the problem still occurs, go to Check 2. Check 2 (One of) HDD(s) may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures and check the operation. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 32 Manual(960-Q08) Satellite U300 and Satellite Pro U300 Maintenance