Toshiba TDP-S1-US User Guide - Page 27
Heading2 - Controls Menu, pick the video standard NTSC, NTSC 4.43, PAL, PAL-M
View all Toshiba TDP-S1-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Controls Menu FIGURE 16 Controls menu Video Standard When Video standard is set to Auto, the projector attempts to pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, or SECAM) automatically based on the input signal it receives. (The video standard options may vary depending on your region of the world.) The input signals for SECAM, PAL-M, and PAL-N video cannot be automatically detected, therefore they must be chosen manually. If the projector is unable to detect the correct standard, the colors might not look right or the image might appear "torn." If this happens, manually select a standard by clicking either mouse button and cycling through the standards. Standby Time This option lets you select how long the lamp stays on and the blank screen is displayed when the projector enters standby mode before the projector turns off. Select among 1, 5, 10, and 15 minutes and 1 and 2 hours by clicking either mouse button and cycling through the options. Ceiling Projection When you turn Ceiling Projection on, the projector turns the image upside down for ceiling-mounted projection. Highlight Ceiling Projection, then click either mouse button to turn this feature on and off. NOTE: If you already know the video standard used in your geographical area, it's often best to manually select it. NOTE: To order the Ceiling Mount, refer to "Optional Accessories" on page 37. 23